Perfect For Keeping the Sensor Secure during Swimming Running or Sports
Range Of Colours
Adjustable And Available in 3 Sizes
Durable Design Made From Flexible Plastic and Elastic
Washable At 30 Degrees
This is a Freestyle Libre sensor armband holder/guard Grey with a black strap. 3D Printed in durable flexible plastic. It is designed to protect your attached sensor and make it less likely that a knock will dislodge it. It is great to use it when your playing sports or swimming, where moisture or contact may make the sensor come loose. The armband can be adjusted with the two attached buckles. I recommend that you adjust the armband to the correct tightness on your arm below where the sensor is attached then lift the holder and place it over the sensor. To remove the armband I would press down on the sensor and gently lift the holder off and move the armband down your arm. There are now three options for the strap size and the strap can be adjusted for a smaller diameter arm. To find the length you need measure the circumference of your arm. If you don't have a fabric measuring tape then you can wrap a piece of string around your arm mark it and measure that. The length of elastic matches the maximum circumference of the arm. For example for a 35cm arm the 40cm strap would be needed. If you find you have a lot of excess strap after you have adjusted it you can cut the excess off and seal the edge with flame. You will receive all the parts in picture 3. The Freestyle Libre sensor and Display Stand are not included. This was originally made to help my Mother who was struggling to keep the Libre sensor on for the full 14 days and I've worked with my many customers to improve the design. It is made from flexible plastic as this is more comfortable to wear and durable. Other items available made from ridged plastics like PLA will eventually deform under load and break. Please look at my feedback to see hundreds of happy users.  The elastic strap may contain latex. Please see my shop for other Freestyle Libre compatible products.I also make Pre cut protective stickerswww..co.uk/itm/303279140701
For extra elastic straps in a wide range of colours please see this listing. www..co.uk/itm/303228648260 3D Printing works by laying down layers of plastic and therefore the surface finish will not be smooth like mass manufactured plastic parts and may have some visual artefacts. My pictures are always representative of the quality of finish you will receive.   Please contact me if there are any issues I will always to my best to resolve them.